Stellar Access Point 1362

OAW-AP1362-RW – Alcatel-Lucent AP1362 Outdoor Access Point :

  • Tri radio 5GHz 4×4:4 / 2.4GHz 2×2:2
  • 1 x 10/100/1000/2500 Mbps, 802.3at/bt
  • 1 x 10/100/1000 Mbps, PoE PSE output 802.3at
  • 6 N-Type external antenna connectors
  • Integrated BLE/Zigbee radio
  • Operating Temperature: -40°C to 65°C
  • IP67

Description

Wi-Fi 6 Alcatel-Lucent OmniAccess Stellar AP1362 Outdoor Access Point (OAW-AP1362-RW)

Model AP1362 (OAW-AP1362-RW)
Radio Specification • AP type: Outdoor, integrated three radios
• Tri Radio, 5 GHz 802.11ax 4×4:4 and 2.4 GHz 802.11ax 2×2:2 and dedicated scanning radio
¬ 5 GHz: 4×4:4 up to 2.4Gbps wireless data rate to individual 4SS HE80 802.11ax client devices. 2.4 GHz: 2×2:2 up to 573 Mbps wireless data rate to individual 2SS HE40 802.11ax client devic-es.
• Supported frequency bands (country-specific restrictions apply):
¬ 2.400 to 2.4835 GHz
¬ 5.150 to 5.250 GHz
¬ 5.250 to 5.350 GHz
¬ 5.470 to 5.725 GHz
¬ 5.725 to 5.850 GHz
Interfaces • 1x 10/100/1000/2500 Mbps IEEE 802.3 compliant autosensing (RJ-45) uplink port, ENET0, Power over Ethernet (PoE) 802.3at/bt compliant
• 1x 10/100/1000 Mbps IEEE 802.3 compliant auto-sensing (RJ-45) downlink port, ENET1, PoE PSE output up to 802.3at power dependent on input PoE
• 1x SFP port
• 1x USB 2.0 Type C (5V, 1A)
• Reset button: Factory reset
Security • Integrated Trusted Platform Module (TPM 2.0) for secure storage of credentials and keys
• 802.11i, WPA2, WPA3-Enterprise with CNSA Option, Personal(SAE), Enhanced Open(OWE)
• 802.1X
• WEP, Advanced Encryption Standard (AES), Temporal Key Integrity Protocol (TKIP)
• Firewall: ACL, wIPS/wIDS and DPI application policy enforcement with OmniVista™
• Portal page authentication
Antenna • AP1362: 2×2:2 @ 2.4GHz, 4×4:4 @ 5GHz
¬ 6 N-Type external antenna connectors, integrated 6KA lightning protection, not require additional lightning arrester.
¬ ANT0-ANT3 are 5GHz antenna connectors, ANT4-ANT5 are 2.4GHz antenna connectors
Power • Maximum (worst case) power consumption:
¬ 64W (802.3bt Type4 PoE in) with ENET1 802.3at PSE enabled.
¬ 46W (802.3bt Type3 PoE) with ENET1 802.3af PSE enabled.
¬ 24W (802.3at) with disabled ENET1 PSE, USB.
• Maximum power consumption in idle mode: 10W
• Power over Ethernet (PoE): 48 V DC (nominal) 802.3bt/at compatible source
Mounting • Pole/Wall mounting for (Mount kit needs to be ordered separately)
Environmental • Operating:
¬ Temperature: -40°C to 65°C
¬ Humidity: 10% to 90% non-condensing
• Storage and transportation:
¬ Temperature: -40°C to +85°C
• Wind resistance:
¬ Up to 100MPH sustained winds
¬ Up to 165MPH wind gusts
Dimensions/Weight • Single AP excluding packing box and accessories:
¬ 243mm (W) x 243mm (D) x 85mm (H)
¬ 2684g
• Single AP including packing box and accessories:
¬ 320mm (W) x 300mm (D) x 135mm (H)
¬ 3286g

 

Additional information

Wifi6

wireless

Reviews

There are no reviews yet.

Be the first to review “Stellar Access Point 1362”

Your email address will not be published. Required fields are marked *

error: Content is protected !!