Stellar Acces Points 1232

OAW-AP1232-RW – Alcatel-Lucent AP1232 802.11ac Indoor Access Point :

  • Tri-Radio, 11n 4×4:4 + 11ac 4×4:4 + 11ac 4×4:4
  • 1 x 100/1000/2500Base-T port, PoE
  • 1 x 10/100/1000Base-T port, PoE
  • Integrated BLE radio
  • External antennas

Description

Wi-Fi Alcatel-Lucent OmniAccess Stellar AP1232 Indoor Access Point (OAW-AP1232-RW)

Model AP1232 (OAW-AP1232-RW)
Radio specification • AP type: Indoor, tri radio, dual 5 GHz 802.11ac 4×4:4 MU-MIMO and 2.4 GHz 802.11n 4×4:4 MIMO
• 5 GHz: Four spatial stream multi user (MU) MIMO for up to 1733 Mb/s wireless data rate to up to three MU-MIMO capable client devices simultaneously
• 5 GHz: Four spatial stream Single User (SU) MIMO for up to 1,733 Mb/s wireless data rate to individual 4×4 VHT80 or 2×2 VHT160* client devices
• 2.4 GHz: Four spatial stream single user (SU) MIMO for up to 800 Mb/s wireless data rate to individual 4×4 VHT40 client devices (600 Mb/s for HT40 802.11n client devices)
Interfaces • 1x 100/1000/2500Base-T autosensing (RJ-45) port, Power over Ethernet (PoE)
• 1x 10/100/1000Base-T autosensing (RJ-45) port, Power over Ethernet (PoE)
• 1x Bluetooth Low Energy (BLE) radio, integrated antenna
¬ 9.5 dBm transmit power (typical, basic rate)
¬ -92.5 dBm(Typical) receive sensitivity
• 1x USB 2.0 (Type A connector)
• 1x management console port (RJ-45)
• Reset button: Factory reset
• Kensington security slot
• 8 x RP-SMA Antenna connectors
Antenna • External 4×4:4 @ 2.4 GHz, dual 4×4:4 @ 5 GHz 8 RP-SMA connectors for external dual band antennas.
Power • Supports direct DC power and Power over Ethernet (PoE)
• When both power sources are available, DC power takes priority over PoE
• Maximum (worst case) power consumption:
¬ 27.6 W (PoE or DC)
¬ Excludes power consumed by external USB device; USB with 500mA load can add up to 2.9 W
¬ Maximum power consumption in idle mode: 13.5 W
¬ Maximum power consumption in idle mode: 13.5 W
• Direct DC source: 48 V DC nominal, ±5%
• Power over Ethernet (PoE):
¬ 48 V DC (nominal) 60W/802.3at compliant source; If PoE PSE side does not support LLDP, AP would be powered by 30W/802.3at
¬ Unrestricted functionality with 802.3 at High PoE (4-pair)
¬ The USB port is disabled and all the three radio will operate in 2×2:2 mode when the AP is powered by 30W 802.3at PoE source.
Mounting • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16- inch flat T-bar drop-tile ceiling.
• Optional mount kits for Open Silhouette and Flanged Interlude.
• Optional mount kits for flat-surface (wall).
Environmental • Operating:
¬ Temperature: 0°C to 45°C
¬ Humidity: 5% to 90% non-condensing
• Storage and transportation:
¬ Temperature: -40°C to +70°C
Dimensions/Weight  • Single AP excluding packing box and accessories:
¬ 230 mm (W) x 230 mm (D) x 47 mm (H)
¬  1400 g
• Single AP including packing box and accessories:
¬ 283 mm (W) x 267 mm (D) x 80 mm (H)
¬ 1775 g

 

Additional information

wifi5

wireless

Reviews

There are no reviews yet.

Be the first to review “Stellar Acces Points 1232”

Your email address will not be published. Required fields are marked *

error: Content is protected !!