Stellar Acces Points 1221

OAW-AP1221-RW – Alcatel-Lucent AP1221 802.11ac Indoor Access Point :

  • Dual-Radio, 11n 2×2:2 + 11ac 4×4:4
  • 1 x 10/100/1000Base-T port, PoE
  • Integrated antennas

Description

Wi-Fi Alcatel-Lucent OmniAccess Stellar AP1221 Indoor Access Point (OAW-AP1221-RW)

Model AP1221 (OAW-AP1221-RW)
Radio specification • AP type: Indoor, dual radio, 5 GHz 802.11ac 4×4:4 MU-MIMO and 2.4 GHz 802.11n 2×2:2 MIMO
• 5 GHz: Four spatial stream single user (SU) MIMO for up to 1733 Mb/s wireless data rate to individual 4×4 VHT80 or 2×2 VHT160* client devices
• 5 GHz: Four spatial stream multi user (MU) MIMO for up to 1733 Mb/s wireless data rate to up to three MU-MIMO capable client devices simultaneously
• 2.4 GHz: Two spatial stream single user (SU) MIMO for up to 400 Mb/s wireless data rate to individual 2×2 VHT40 client devices (300 Mb/s for HT40 802.11n client devices)
Interfaces • 1x 10/100/1000Base-T autosensing (RJ-45) port, Power over Ethernet (PoE)
• 1x USB 2.0 (Type A connector)
• 1x management console port (RJ-45)
• Reset button: Factory reset
• Kensington security slot
Antenna • Built-in 2×2:2 @ 2.4 GHz, 4×4:4 @ 5 GHz
¬ Integrated dual-band down tilt omni- directional antennas for 4×4 MIMO with maximum antenna gain of 3.61 dBi in 2.4 GHz and 4.45 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP.
Power • Supports direct DC power and Power over Ethernet (PoE)
• When both power sources are available, DC power takes priority over PoE
• Maximum (worst case) power consumption:
¬ <15.6 W (802.3at PoE or DC)
¬ Excludes power consumed by external USB device; USB with 500mA load can add up to 2.9 W
¬ Maximum power consumption in idle mode: 7.5 W
• Direct DC source: 48 V DC nominal, ± 5%
• Power over Ethernet (PoE):
¬ 48 V DC (nominal) 802.3af/802.3at compliant source
¬ Unrestricted functionality with 802.3at PoE
¬ The USB port is disabled and the 5 GHz radio is restricted to 2*2:2 when the AP is powered by 802.3af PoE source
Mounting • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16- inch flat T-bar drop-tile ceiling.
• Optional mount kits for Open Silhouette and Flanged Interlude.
• Optional mount kits for flat-surface (wall).
Environmental • Operating:
¬ Temperature: 0°C to 45°C (+32°F to +113°F)
¬ Humidity: 10% to 90% non-condensing
• Storage and transportation:
¬ Temperature: -40°C to +70°C (-40°F to +158°F)
Dimensions/Weight  • Single AP excluding packing box and accessories:
¬ 180 mm (W) x 180 mm (D) x 36 mm (H)
¬ 700 g
• Single AP including packing box and accessories:
¬  228 mm (W) x 198 mm (D) x 66 mm (H)
¬  920 g

 

Additional information

wifi5

wireless

Reviews

There are no reviews yet.

Be the first to review “Stellar Acces Points 1221”

Your email address will not be published. Required fields are marked *

error: Content is protected !!